Mencegah User Agar Tidak Bisa Membuka LAN Setting Pada Window Dengan Hide Tool

Terkadang ada diantara beberapa user yang sekedar iseng mengganti ip-address nya sendiri, entah ingin tahu atau ada maksud lain. Tetapi pada sisi admin dan system hal tersebut sedikit menjengkelkan karena dengan bergantinya ip address tersebut ada beberapa konfigurasi yang tidak berjalan dengan semestinya.

Dengan Aplikasi Hide Tool ini, itu bisa diamankankan dengan menutup dialog box Internet Protocol (TCP/IP) pada LAN Connection Properties.

Bagi anda yang belum mengetahui tentang Hide Tool, silahkan membuka artikel pada blog ini. Download dan install Aplikasi tersebut.

Finding the optimal TCPIP receive window size

What problem does the receive window solve?

TCPIP is a reliable network protocol where each packet sent is acknowledged by receiver, and if the sender doesn't get the acknowledge packet back within a certain timeout, then it retransmits the original packet. But it is inefficient to wait for the acknowledge packet from the receiver before sending the next packet. The Receive WINdow(RWIN) solves the problem of the sender constantly waiting for the receiver acknowledge.

Free: Automatic Copy/Move/Delete On Next Boot

Well on this page is a neat little utility that gives a right click option to delete, move or copy file/s on the next boot. I’ve just tried it and it does work. Your readers may be interested in this.

http://www.gibinsoft.net/gipoutils/rightview.htm  

How to Delete Undeletable Files in Windows

Many times when trying to remove an unwanted program, especially a piece of adware or spyware, you may run across a file that is undeletable by any normal method. When you try to remove it you'll receive the error message shown below telling you "access denied" and explaining the file may be in use.  You may also receive one of the following messages.

Cannot delete file: Access is denied
There has been a sharing violation.
The source or destination file may be in use.
The file is in use by another program or user.
Make sure the disk is not full or write-protected and that the file is not currently in use.

Installing Remote Desktop Web Connection in Windows XP

With the Remote Desktop Web Connection, you can start a remote desktop connection from your Web browser. To do so, point your browser to a server that is configured with Remote Desktop Web Connection, download an ActiveX control, and then connect to a Windows XP-based server with Remote Desktop. Client computers may also connect to a Microsoft Windows 2000-based server or to a server that is running Microsoft Windows NT 4.0 Terminal Server Edition.

To turn on the Remote Desktop Web Connection, follow these steps:

1. Click Start, and then click Control Panel.
2. Double-click Add/Remove Programs.
3. Click Add/Remove Windows Components.
4. Click Internet Information Services, and then click Details.
5. Click World Wide Web Service, and then click Details.
6. Select the Remote Desktop Web Connection check box, and then click OK.
7. Click OK on the Internet Information Services screen.
8. Click Next on the Windows Components Wizard screen.

Note If you cannot connect to the remote computer after you follow these earlier steps, make sure that Remote Desktop is turned on. To do this, follow these steps:

1. Right-click the My Computer icon on the desktop, and then click Properties.
2. Click the Remote tab.
3. Make sure that the Allow users to connect remotely to this computer check box is selected, and then click OK.
4. Try to connect to the remote computer again.

The files should now be installed. To start the Remote Desktop Web Connection, type the following URL in a client computer's Internet browser, where servername is the name of your server:

http://servername/tsweb

Note When you upgrade Windows XP, the Remote Desktop Web Connection Control is not updated. To update it, follow these steps:

1. Click Start, click Control Panel, and then click Add or Remove Programs.
2. Click Add/Remove Windows Components.
3. Click Details.
4. Select the World Wide Web Service check box, click Details, then click the Remote Desktop Connection check box.
5. Click OK.
   
   The latest version appears.

Disable the automatic updating of file access time

When a file is opened then the last access timestamp for the file is updated. This timestamp can be useful for applications that detects, whether certain files have been used recently. If not using such applications, then one might consider disabling the updating of this timestamp, to make file operations quicker.

Configure the following DWORD registry key (Only affects NTFS partitions):

[HKEY_LOCAL_MACHINE \System \CurrentControlSet \Control \FileSystem]
NtfsDisableLastAccessUpdate=1 (Default = 0, Vista Default = 1)

Note the utility fsutil can also be used to change this value:

fsutil behavior set disablelastaccess 1

More Info MS KB Q150355

http://smallvoid.com/article/winnt-ntfs-last-access.html

Configure the page file for best performance

When using Windows NT operating systems, then the best configuration for the pagefile is to let Windows handle it by setting it to be system managed. So unless having a very special system configuration, then one should just leave the pagefile alone.

When using Windows 9x operating system, then one can consider to set a custom size for the page file. The system managed page file in Win9x is constantly resized depending on the memory load, which increases file fragmentation.